cts logo

Battery Replacement for Infinity Start System

1. Locate (3) Philips head screws on back cover and remove with #2 Philips head screwdriver.

infinity start system replacement

2.  Lift up battery bracket above battery with your thumb.

infinity start system battery replacement

3.  While lifting the battery bracket, pull the battery out far enough to be able to access the positive and negative terminals.  Red is positive and black is negative.

infinity start system battery replacement

4.  Disconnect both female spade electrical connectors by sliding them off the battery terminals.  **Slightly manipulating them back and forth while pulling may help.**

infinity start system battery replacement

5.  Completely remove battery.

infinity start system battery replacement

6.  Replace old battery with new 12 volt 7.0 Amp. Hr battery – CTS part number R-420-003, which you can purchase here.

Steps 7 – 11 are steps 1 – 5 in reverse order and operation.